Grillo Climber 7.18

Safe Mowing on Slopes
The Climber 7.18 is generally used on medium sized properties up to 3 - 4 acres and where the terrain underfoot is smoother and therefore the machine can be a lighter build than the heavier 9 series models which suit rougher applications.
 
This machine has a 34" (85cm) cutting width and 18 hp V-Twin cylinder engine. 

The Climber 7.18 will tackle terrain and long grass that other mowers can't cope with and allow you to mow safely in damp and slippery conditions.
With more engine power than the smaller 7.13 model, travelling up and down steep slopes is easy even while mowing long grass.

This machine has a hydrostatic gearbox which uses hydraulic oil to provide the motive link between the engine and the wheels.  No gears = increased reliability.

The 7.18 has dependable front brakes not available on other machines which allow you to brake the mower when mowing downhill and increases safety in case of emergency stopping. 

Differential locking increases traction by engaging both drive wheels simultaneously when slipping occurs.  This allows the Climber to mow when slippery or dry and over rough ground where other mowers struggle.

If you have a big property and need a heavier duty machine, see the next model up - the Climber 9.18 > 

 

Specifications


Engine: Briggs & Stratton Intek 7180 18hp V TWIN cylinder.
Economy: 3.5 lt/hr
Starter: Electric 12V battery
Gearbox: Hydrostatic Transmission
Differential with locking device
Clutch V-belt for P.T.O
Speed forward 0-9km/hr
Speed reverse 0-4 km/hr
Tyres front: 13x5.00-6
Tyres rear: 16x6.50-8
Brakes Front emergency & rear parking brake
Seat Sprung and adjustable
Cutting deck rear/side discharge

Cutting system
Central bar with swing tip blades
Cutting Width: 850mm (34")
Blade tip speed: 70 m/sec
Cutting height 6 positions: from 35-85mm, 1 travel position
Hourly cutting capacity: 6000 m2/hr approx

Internal steering radius: 485 mm
Fuel tank: 7 lt with 1 lt emergency supply
Front headlight

Length 1895 mm
Width 950 mm
Height 975 mm
Weight 253 kg

If you have a big property and need a heavier duty machine, see the next model up - the Climber 9.18 >

Testimonials

Here’s a Climber story from Garry O’Dell at Sunrise B&B, Brunkerville, NSW.  Garry uses a Climber 7.16 to maintain the grounds at his 4.5 star B & B. He choose the Climber for it's safety and it's fantastic cutting deck.  Read More >>

Doug Creek had a shocking accident on a normal tractor ride on mower on his property.  When the time came to mow again Doug bought a Climber 7.16 to make sure it didn't happen again.  Read more >>

"I was using the largest walk behind mower available as it was the only thing that could do my slopes, but it was so hard I would never even get close to finishing the lawns...  Read More >>